Getting the Most Out of Dual SACI and Concrete Sealer Systems
When performing a concrete repair or routine sealer application, is there any benefit to adding a surface-applied corrosion inhibitor (SACI) underneath? Will the combination enhance protection or undermine the whole system? Cortec ® looks at these issues and suggests how contractors can get the most out of their dual SACI waterproofing system.
Why use concrete waterproofing?
Sealers, waterproofing membranes, and other moisture barrier coatings are a common part of concrete maintenance and repair. Their chief purpose is to block or seal the surface so that moisture, chlorides, and carbonation cannot seep into concrete pores. This slows down the deterioration process and helps the concrete last longer. Common places to find epoxy or urethane coatings, methyl methacrylate sealers, or other waterproofing membranes on concrete are parking ramps and industrial buildings—especially those in the chemical processing industry.
What are the benefits of SACIs?
Treating concrete with SACIs before applying a coating, sealer, or traffic membrane adds an additional level of corrosion protection. MCI ® -2020 contains the highest corrosion inhibitor concentration among SACIs on the market and is therefore the most efficient choice for this application.
Migrating corrosion inhibitors in MCI ® -2020 penetrate concrete pores and are attracted to metal surfaces to form a molecular layer that actively inhibits the corrosion reaction. This second line of defence is especially important if the physical barrier or coating fails, allowing water and corrosives to seep in and be trapped on the concrete surface. The presence of SACIs in the concrete can help mitigate the corrosion reaction.
How to ensure proper adhesion
While both sealers and SACIs can play a role in concrete protection, there is sometimes a concern for adhesion between layers when applying multiple products to a concrete substrate. If adhesion fails, the effectiveness of the applied system is jeopardized, leaving concrete exposed to water and other contaminants.
Fortunately, the solution is as simple as proper application. Waiting 24 hours after applying MCI® -2020 gives more time for the corrosion inhibitors to work their way into the concrete pores, away from the surface. Subsequent rinsing with water removes any residual and leaves behind a clean surface for coating or waterproofing application.
Testing according to ASTM D7234 has confirmed the compatibility of several traffic coatings and membranes with MCI ® -2020, and in some cases, a water rinse was not needed to maintain adhesion.
Get the most out of your surface-applied system
The application of water repellents, coatings, and waterproofing membranes will remain a common practice as long as parking garages and other concrete structures remain vulnerable to corrosion. Using MCI ® SACIs is a great way to enhance routine maintenance or repairs by fortifying the concrete with Migrating Corrosion Inhibitors. Simple steps such as rinsing the surface prior to waterproofing application help contractors and building owners get the most out of their dual water-repelling, corrosion-inhibiting system to extend concrete service life.
